MTA2 If selected, the analysis type can be used with maintenance task analyses (MTA2). See Also RCM2 If selected, the analysis type can be used with RCM2 analyses. See Also RBI If selected, the analysis type can be used with risk-based inspection analyses. See Also Prioritization analysis If selected, the analysis type can be used with asset prioritization analyses. See Also CPR If selected, the analysis type can be used with current practice reviews. See Also SIF If selected, the analysis type can be used with safety instrumented function analyses. See Also HAZOP If selected, the analysis type can be used with HAZOP analyses. See Also Condition analysis If selected, the analysis type can be used with asset condition analyses. See Also Maintenance efficiency index (MEI) options If the maintenance efficiency index is used, select Supported. See Also MEI calculation Select the source of the calculation: • Use the standard APM calculation – The calculation supplied by APM • Use this calculation – Select the custom calculation from the list See Also MEI calculation Custom calculation used to determine the maintenance efficiency index. See Also Savings and costs period The period (for example, 1.000 year) to use when calculating costs, including avoidance savings. See Also MEI threshold If the feasibility analysis results in a maintenance efficiency index (MEI) that is equal to or greater than the threshold, the task is justified. If the MEI is less than the threshold, the task is not justified. See Also Minimum MEI Minimum MEI value. If the calculation results in a value lower than the minimum, the minimum value is used. For example, set this option to 0.00 if negative values are not supported. See Also Minimum MEI Minimum MEI values are supported. See Also Override reason is required If selected, this option requires that users select a reason when they override a feasibility assessment. See Also Include economic impact for economic effects when economic evaluation is not performed When the analyst clicks one of the economic impact buttons on the risk matrix, that severity’s economic impact amount is used in the avoidance savings calculation. The amount is shown on the failure mode’s Failure Data tab. However, if the analyst uses the Economic Evaluation Questionnaire, the results of the evaluation is used. See Also Include economic impact value for health and safety effects When the analysis team performs a criticality analysis, the selected Health and Safety severity’s economic impact amount is included when the failure mode’s avoidance savings is calculated. The amount is shown on the failure mode’s Failure Data tab. See Also Include economic impact value for environmental effects When the analysis team performs a criticality analysis, the selected Environmental severity’s economic impact amount is included when the failure mode’s avoidance savings is calculated. The amount is shown on the failure mode’s Failure Data tab. See Also Include economic impact value for reputation effects When the analysis team performs a criticality analysis, the selected Reputation severity’s economic impact amount is included when the failure mode’s avoidance savings is calculated. The amount is shown on the failure mode’s Failure Data tab. See Also
