Name The name of the indicator. You can enter up to 50 characters. For example, you may create indicators called Odometer, Inlet Pressure Gauge, and Oil Temperature Gauge. See Also Asset The asset to which this indicator applies. See Also Reading is planned for Date and time at which the indicator reading is planned to be taken. See Also Next reading date source The date for the next indicator reading can come from the following sources: • Expected frequency • Indicator degradation next inspection • Manual override • Regulatory inspection • Failure mode analysis • Acknowledgment follow up See Also Frequency Select the expected frequency with which the readings should be collected. This information is used to select indicators in lists and as matching criteria on dynamic inspection routes for standard tasks. Note: A frequency must be selected if the indicator is to use a collection window based on a percentage of its frequency. See Also Regulatory frequency Interval between inspections as mandated by the appropriate regulatory agency. See Also Expected date The date on which the next inspection is expected, based on the Current value date and the inspection factor. See Also Expected value The measurement value expected on the next inspection, based on the Current value and the predicted degradation rate. See Also
