Survey type

A descriptive name for the type of survey.

	See Also

Survey information is supported on readings

Select this option to indicate that survey information is supported on indicator readings. When selected, you must also select the panel to use to display the survey information.

	See Also

Panel to use

The pre-defined panel to use to display the survey information on indicator readings that reference this survey type.

	See Also

Survey information is supported on measurement points

Select this option to indicate that survey information is supported on measurement points. When selected, you must also select the panel to use to display the survey information.

	See Also

Panel to use

The pre-defined panel to use to display the survey information on measurement point readings that reference this survey type.

	See Also

Survey information message

The survey information message to be displayed on the checksheet inspection report, or the work order or work order task description if created from an acknowlegment.

	See Also

Vehicle

Select the policy for whether the vehicle used, is recorded in the survey. Options are: • Measurement point — The property is entered once on the measurement point only. The value is copied when a point reading is created but cannot be changed on the reading. • Measurement point readings — The property is entered only on the measurement point reading. • Both — The property is entered once on the measurement point. The value is copied when a point reading is created where it can be changed. • Not Used — The property is not available for entry on either the measurement point or reading.

	See Also

Event ID

Select the policy for whether event ID is recorded in the survey. Options are: • Measurement point — The property is entered once on the measurement point only. The value is copied when a point reading is created but cannot be changed on the reading. • Measurement point readings — The property is entered only on the measurement point reading. • Both — The property is entered once on the measurement point. The value is copied when a point reading is created where it can be changed. • Not Used — The property is not available for entry on either the measurement point or reading.

	See Also

Copy	Select this option to copy the value from the previous reading’s survey. This option is only available if the property’s value is either Reading only or Both.

	See Also

Copy	Select this option to copy the value from the previous reading’s survey. This option is only available if the property’s value is either Reading only or Both.

	See Also

Offset

Select the policy for whether offset can be recorded in the survey. Options are: • Measurement point — The property is entered once on the measurement point only. The value is copied when a point reading is created but cannot be changed on the reading. • Measurement point readings — The property is entered only on the measurement point reading. • Both — The property is entered once on the measurement point. The value is copied when a point reading is created where it can be changed. • Not Used — The property is not available for entry on either the measurement point or reading.

	See Also

Copy	Select this option to copy the value from the previous reading’s survey. This option is only available if the property’s value is either Reading only or Both.

	See Also

Northing

Select the policy for whether Northing coordinates are used in the survey. Options are: • Measurement point — The property is entered once on the measurement point only. The value is copied when a point reading is created but cannot be changed on the reading. • Measurement point readings — The property is entered only on the measurement point reading. • Both — The property is entered once on the measurement point. The value is copied when a point reading is created where it can be changed. • Not Used — The property is not available for entry on either the measurement point or reading.

	See Also

Copy	Select this option to copy the value from the previous reading’s survey. This option is only available if the property’s value is either Reading only or Both.

	See Also

Depth

Select the policy for whether depth is recorded in the survey. Options are: • Measurement point — The property is entered once on the measurement point only. The value is copied when a point reading is created but cannot be changed on the reading. • Measurement point readings — The property is entered only on the measurement point reading. • Both — The property is entered once on the measurement point. The value is copied when a point reading is created where it can be changed. • Not Used — The property is not available for entry on either the measurement point or reading.

	See Also

Copy	Select this option to copy the value from the previous reading’s survey. This option is only available if the property’s value is either Reading only or Both.

	See Also

Copy	Select this option to copy the value from the previous reading’s survey. This option is only available if the property’s value is either Reading only or Both.

	See Also

Easting

Select the policy for whether Easting coordinates are recorded in the survey. Options are: • Measurement point — The property is entered once on the measurement point only. The value is copied when a point reading is created but cannot be changed on the reading. • Measurement point readings — The property is entered only on the measurement point reading. • Both — The property is entered once on the measurement point. The value is copied when a point reading is created where it can be changed. • Not Used — The property is not available for entry on either the measurement point or reading.

	See Also

Temperature

Select the policy for whether temperature is recorded in the survey. Options are: • Measurement point — The property is entered once on the measurement point only. The value is copied when a point reading is created but cannot be changed on the reading. • Measurement point readings — The property is entered only on the measurement point reading. • Both — The property is entered once on the measurement point. The value is copied when a point reading is created where it can be changed. • Not Used — The property is not available for entry on either the measurement point or reading.

	See Also

Copy	Select this option to copy the value from the previous reading’s survey. This option is only available if the property’s value is either Reading only or Both.

	See Also

Copy	Select this option to copy the value from the previous reading’s survey. This option is only available if the property’s value is either Reading only or Both.

	See Also

Map coordinates

Select the policy for the map coordinates used in the survey. Options are: • Measurement point — The property is entered once on the measurement point only. The value is copied when a point reading is created but cannot be changed on the reading. • Measurement point readings — The property is entered only on the measurement point reading. • Both — The property is entered once on the measurement point. The value is copied when a point reading is created where it can be changed. • Not Used — The property is not available for entry on either the measurement point or reading.

	See Also

Time

Select the policy for whether date and time is recorded in the survey. Options are: • Measurement point — The property is entered once on the measurement point only. The value is copied when a point reading is created but cannot be changed on the reading. • Measurement point readings — The property is entered only on the measurement point reading. • Both — The property is entered once on the measurement point. The value is copied when a point reading is created where it can be changed. • Not Used — The property is not available for entry on either the measurement point or reading.

	See Also

Copy	Select this option to copy the value from the previous reading’s survey. This option is only available if the property’s value is either Reading only or Both.

	See Also

Copy	Select this option to copy the value from the previous reading’s survey. This option is only available if the property’s value is either Reading only or Both.

	See Also

Elevation

Select the policy for whether elevation is recorded in the survey. Options are: • Measurement point — The property is entered once on the measurement point only. The value is copied when a point reading is created but cannot be changed on the reading. • Measurement point readings — The property is entered only on the measurement point reading. • Both — The property is entered once on the measurement point. The value is copied when a point reading is created where it can be changed. • Not Used — The property is not available for entry on either the measurement point or reading.

	See Also

Copy	Select this option to copy the value from the previous reading’s survey. This option is only available if the property’s value is either Reading only or Both.

	See Also

Heading

Select the policy for the heading used in the survey. Options are: • Measurement point — The property is entered once on the measurement point only. The value is copied when a point reading is created but cannot be changed on the reading. • Measurement point readings — The property is entered only on the measurement point reading. • Both — The property is entered once on the measurement point. The value is copied when a point reading is created where it can be changed. • Not Used — The property is not available for entry on either the measurement point or reading.

	See Also

Copy	Select this option to copy the value from the previous reading’s survey. This option is only available if the property’s value is either Reading only or Both.

	See Also

Description

The description of the item. You can use this box to include any additional details.