Site	Site that owns the safety type.

	See Also

Type	Name assigned to the safety type. Safety types are user-defined settings that control the status, approval options, and appearance of the objects to which they are applied. The type’s definition specifies whether it can be used with safety override incidents, safety provisions, or both.

	See Also

Approvals are required

Safety objects of this type must be sent for approval. Tip: In order for the object to be sent, the safety status must allow the object to be sent for approval, the site’s approval settings must require the safety object to be approved, and an approval route must be defined and available.

	See Also

Approval routes

If approvals are required for the type, the route is controlled by these options: • All routes that include safety objects are available for selection • Only the selected routes are available. When you select this option, the table lists approval routes for safety objects. Select the route(s) to be available

	See Also

Creation

Status applied when a safety object of this type is created. The status is applied to new definitions and provision versions.

	See Also

Accepted or approved

Status applied when a safety object of this type is approved (if approval is required). For safety provisions, the status is set on both draft and owning object. This is also the status applied to the provision version when it is marked as accepted.

	See Also

Sent for approval

Status applied when a safety object of this type has been sent for approval. For safety provisions, the status is set on both the owning object and its draft version.

	See Also

Redrafted

Status applied when a safety object of this type is redrafted. Typically, an object is redrafted when an approval request has been rejected or if you wish to make changes before it is approved. Redrafting cancels any approval request and removes it from the approver’s list of active documents to be approved. When the object is revised, it must follow the approval process from the beginning. For safety provisions, the status is applied to both the owning object and its draft version.

	See Also

Rejected

Status applied when a safety object of this type has been rejected during the approval process. For safety provisions, the status is applied to both the owning object and its draft version.

	See Also

Version is moved to history

Status applied to the safety object when its current version moves to history. This occurs when a draft version is accepted and becomes the new current version.

	See Also

Creation

Status applied to an override incident when it is created.

	See Also

Automatically updated as started

When this status is applied to an incident, it is marked as started.

	See Also

Automatically updated as started

Allows override incidents to be updated as started by the Update Open Override Incidents command, executed manually (site’s Tools menu, Safety Management) or using a scheduled action. The selected status, for example “Incident in progress”, is applied to the incident when the update occurs. The Mark incident as started option should be enabled on the safety status.

	See Also

Usage exceeded

Status applied to an override incident of this type when the override definition’s “maximum usage” duration has been exceeded.

	See Also

Action

Specifies whether the description of the action to be performed to prevent or mitigate a hazard is mandatory, optional, or unavailable for safety provisions with this type.

	See Also

Process parameter

Specifies whether a process parameter is mandatory, optional, or unavailable for safety provisions with this type.

	See Also

Protective devices and equipment

Specifies whether tables of protective devices and protected equipment are mandatory, optional, or unavailable for safety provisions with this type.

	See Also

Items

Specifies whether sequential items are mandatory, optional, or unavailable for safety provisions with this type.

	See Also

Indicators

Specifies whether related indicators are mandatory, optional, or unavailable for safety provisions with this type.

	See Also

Reliability Program

Specifies whether related standard tasks, standard jobs, and job tasks are mandatory, optional, or unavailable for safety provisions with this type.

	See Also

Documents

Specifies whether related standard documents are mandatory, optional, or unavailable for safety provisions with this type.

	See Also

Description

The description of the item. You can use this box to include any additional details.