Frequency Select the expected frequency with which the readings should be collected. This information is used to select indicators in lists and as matching criteria on dynamic inspection routes for standard tasks. Note: A frequency must be selected if the indicator is to use a collection window based on a percentage of its frequency. See Also Trade Select the trade that is normally responsible for collecting readings for the indicator. This information is used to filter lists of indicators. See Also Operating condition Select the operating condition that the asset must have before readings can be collected for it. This information is used to filter lists of indicators. See Also Maintenance group Select the maintenance group that is normally responsible for collecting readings for this indicator. This information is used to filter lists of indicators. See Also Technology Select the PdM technology used to collect readings from the indicator. This information is used to filter lists of indicators. See Also Collection group Collection group is one of the properties that can be assigned to a route asset on a standard task’s dynamic inspection route. Collection groups are typically used for large assets whose indicators are read at different points in the route. For example, indicators could be split into two groups: front and back indicators. The front and back of the asset might be visited at different times on the route or even on different routes (standard tasks). See Also Collection set Collection set is one of the matching criteria that can be used to select indicators for a standard task’s dynamic inspection route. You can create collection sets as required by your organization to identify indicators for different routes. See Also
