Collection sequence Enter the sequence number to be given to the indicator when it is added to a standard task. The sequence number suggests the order in which the indicator reading is to be taken. This default sequence can be changed on the standard task. See Also Collection group Collection group is one of the properties that can be assigned to a route asset on a standard task’s dynamic inspection route. Collection groups are typically used for large assets whose indicators are read at different points in the route. For example, indicators could be split into two groups: front and back indicators. The front and back of the asset might be visited at different times on the route or even on different routes (standard tasks). See Also Collection set Collection set is one of the matching criteria that can be used to select indicators for a standard task’s dynamic inspection route. You can create collection sets as required by your organization to identify indicators for different routes. See Also Bar code If your organization uses bar codes to identify employees, assets, indicators, or areas, enter the bar code here. The number must be unique for all objects that support bar codes. For example, an employee’s bar code might be his employee number with the prefix “E”. See Also External ID The short name for the indicator. This is an optional value that does not need to be unique for the asset. The default value is copied from the indicator name. See Also Map coordinates The latitude and longitude coordinates of the indicator. Note: By default, the map coordinates are automatically populated with the coordinates of the asset to work on. Note: Latitude can have values ranging from -090.000 to +090.000. Longitude values can be from -180.000 to +180.000. For values outside these ranges, APM will accept the values and adjust accordingly. For example, a longitude value of +200.0 will translate to -160.0 on the map. See Also
