Frequency Select the expected frequency with which the readings should be collected. This information is used to select indicators in lists and as matching criteria on dynamic inspection routes for standard tasks. Note: A frequency must be selected if the indicator is to use a collection window based on a percentage of its frequency. See Also Inspection factor An inspection factor is the portion of the normal frequency to be used when calculating indicator collection dates. For example, an inspection factor of “0.5” means that the indicator reading should be collected at half its normal frequency (1 year instead of 2 years). See Also Regulatory frequency Interval between inspections as mandated by the appropriate regulatory agency. See Also Trade Select the trade that is normally responsible for collecting readings for the indicator. This information is used to filter lists of indicators. See Also Operating condition Select the operating condition that the asset must have before readings can be collected for it. This information is used to filter lists of indicators. See Also Maintenance group Select the maintenance group that is normally responsible for collecting readings for this indicator. This information is used to filter lists of indicators. See Also Technology Select the PdM technology used to collect readings from the indicator. This information is used to filter lists of indicators. See Also Inspection type The type of inspection to be performed on the asset, for example, “Intrusive” or “Out of service”. See Also Inspection effectiveness This value provides a measurement of the thoroughness, sensitivity, and efficiency of the inspection strategy, which can then inform your assessments of confidence and probability of failure. See Also
