Indicator to Read

The name of the indicator for which you are entering a reading.

	See Also

Asset

The asset to which this indicator applies.

	See Also

Value collected

The value collected for the most recent numeric or cumulative indicator reading.

	See Also

State

The new state of the indicator as a result of the indicator reading.

	See Also

Reason

Select the reason that the cumulative indicator reading is lower than the previous reading: • Meter roll-over: Select this option if the meter has passed the roll-over point. When this reason is selected, the life-to-date value for the indicator is calculated as the roll-over value, plus the value of the current reading. This reason is not available for indicators that do not have the Roll-over value filled in. • Previous reading incorrect: Select this option if you are correcting the previous reading. When this reason is selected, the life-to-date value is adjusted to reflect the correction.

	See Also

Alarm Type

The type of warning or alarm that is triggered when an indicator reading falls within the range for this state.

	See Also

Fixed during inspection

If the value that you are entering causes an alarm, you can select this option to indicate that the problem that caused the alarm was fixed during the inspection. When you mark a reading as having been fixed during inspection, the alarm is turned off so that, when the reading is processed, no alarm is raised (that is, no icons flash on the Inspection Management view). The alarm reading is automatically acknowledged, and no further action is required.

	See Also

Operating condition

The asset’s operating condition at the time that the reading was taken.

	See Also

Note	The notes entered by the person who collected the indicator reading.

	See Also