Status Status of an action plan indicates if it has been reviewed and marked “complete”. It can have the status “Facilitation Incomplete”, “Facilitation Completed” (analysis has been done), “Implementation Completed” (reliability program has been implemented), or “Implementation Not Required”. See Also Asset Asset that the failure mode analyzes. When failure mode optimization requires Isograph Availability Workbench, this attribute is mapped to location ID, function ID, and cause ID in AWB. See Also Failure Mode A failure mode is an event that causes an asset to fail to perform its function. For example, if a pump’s impeller becomes worn, the pump cannot convey liquid at the required rate. When failure mode optimization requires Isograph Availability Workbench, this attribute is mapped to the cause description in AWB. See Also Trade Type of trades person who will perform the action. When failure mode optimization requires Isograph Availability Workbench, this attribute is mapped to the Labor ID in AWB. See Also Modification type The modification type for the modification/redesign recommended task. Examples are Maintenance procedure, Training, and Physical. When failure mode optimization requires Isograph Availability Workbench, this attribute is mapped to the cause’s Redesign description property in AWB. See Also
